FutureForge online Hobbit Hole B (3)

 

I'm none too happy with the loaves on the table

as some are huge.

The Greenstuff efforts on the left are an attempt

to have them about the same size.

As you can see from the 'pots' on the right,

the Hobbit potter is even worse than the Hobbit baker.

I tried for a 'park bench' for the front of the house

made from skewers.

I'll try again using cocktail sticks

making it altogether smaller.

Now the loaves are roughly equal

and the 'scrap' ones have ended up in a bottle cap 'bin'.

I've finally settled on the third 'roof' by the door.

I changed the supports too

as I thought there would be no reason for using those huge logs.

FutureForge online Hobbit Hole B (2)

 

I've been unhappy with the heavy wooden roof

simply to cover the goods leaving the back door.

I figured I could make a frame and use material to cover it.

Here's the frame to stretch a scrap of tights over it.

Still not too happy but perhaps I'll stop there.

FutureForge online Hobbit Hole B (1)

Sorry. It's been a while. Away with The Settlers.

Back to proper underground dwellings, well, half and half.

That tall chimney makes this either a potters home or a bakery. 

Another terrific fascia from FututreForge online through Etsy.

Windows are from Games Workshop.

I've wanted to put a back door on a Hobbit Hole.

This is edging in the right direction.

Hobbits view living above ground floor is strictly for the birds

but having several floors below ground is perfectly reasonable.

Here, we're halfway there.

That side door is also from FFo.

The front door will be approached via steps

and the produce sold from a lower area, a few steps down.

The side door is settled in nicely and a ramp prepared for the front steps.

They are coffee stirrers coated with 'Dark Earth'.

The doors are in Enchanted Blue, the frame in Altdorf Guard.

The wall is in Vallejo Light Sea Green as is the cross of the window.

The usual varnished 'Shadow Grey' for the glass (it's actually blue).

A move to change the appearance of the fascia for the next hole.

The stack has been taken down by about 1/2 inch

and a piece of ballpoint used as a pot.

It sits on card coated with 'Dark Earth'.

I think they'll shape up nicely.

The other change is coffee stirrer boards  to the left.

FFO Hobbit Houses 1 and 2 (f)

 

Path and steps laid though the latter is downright dangerous.

You won't believe the language that came from beneath the 'pointy hat'

when HE came to call and landed full length.

It wasn't, 'Fly you fools!, I can tell you that.

I'm not sure what to put on the back lawn.

The large amount of 'moss' growing up the walls

is to hide the gaps 'twixt beams and brickwork.

The bricks should have gone on first

and the beams placed over them.

FFO Hobbit Houses 1+2 (e)

 

The orange background to the red frames

keeps to the Hobbit liking of bright colours

but is a bit less scary than yellow and red.

I've lightly sanded the plasticard walls to provide a surface for the glue.

As it happens, by taking off the spray painted surface

and exposing the card colour it has produced a nice weathered look.

I should have done something similar to the chimney stacks.

Wall bricks in place.

I realised that none of the adhesives I have

would do a great job fixing plastic to polystyrene.

A small tube of Copydex was the answer, if a rather messy one.

I should, of course, have put the card in place before the beams.

The gaps at the edges are small but noticeable.

Because of the card backing to the windows, ordinary PVC worked for them.

I should, however, have left a flange of card for the beam above the windows.

Even now, there may be a change to that beam.

Here's the house, sunk into the base 'hill'.

I'll have to build it up slightly in places.

I'm still unsure what to do with the limited size of the back garden.

The house being so small, I figure it's that of an old 'retired' couple.

FFO Hobbit Houses 1+2 (d)

 

The 'floor plan' of the second house.

As usual, I made error after error on this.

I first made the building too high,

then, by burying the base, made it too low.

It was supposed to look as if it was on the top of a mound

but looked as if it had been swallowed up by it.

I wanted a different shape for the windows on this one.

At first I chose yellow as the background to the windows

 with bright red surround.

However, they looked like warning signs round Chernobyl.

DANGER!

Do not enter.

Risk of death and foot baldness.

Orange is bright enough.

FutureForgeOnline Hobbit House 1 + 2 (c)

 

Here's how it's looking.

The cat is from a kit 'Farmyard Animals'.

As are the pigs, finally painted in Dwarf Flesh.

The 'straw' was snipped from youngest grandchild's fringe.

Close down altogether now. House full of kids!

FutureForgeOnline Hobbit House 1 + 2 (b)

 

A start on the second Hobbit House

The best of the gates, so far.

The hinges and catch are from plastic shelf edging.

After half a dozen stabs at the right colour for pigs,

I found and old pot of Dwarf Flesh which seems about right.

A start on the pig sty.

I've realised that the progress on the house and yard

 has not appeared on here.

It will be a nice surprise for you when it does.

FutureForgeOnline Hobbit House 1 + 2 (a)

 

As you can see, the roof soil has been delivered 

and sown with good quality grass seed.

The grass is up already and the chimneys finished and potted.

Both pots are pieces of ball point pens.

I've topped the chimneys with card painted in Dark Earth

as I thought the FFO one was rather too smart

compared with my home made one.

The 'caps' bring them together. 

A bit of wall washing now needed and a garden of sorts.

As I'm out of rocket stick I've tried to make window sills etc

from coffee stirrers glued together.

The first Hobbit House might have had pigs in the back yard

but I thinks it looks too smart for that.

It will still need some fencing though and here are a couple of experiments.

Split coffee stirrers and barbeque skewers.

The darker pieces are the window sill/fence post experiment.

A start on house number two with corner verticals as on the first one.

Unfortunately the rocket stick supply problem

brings thing to a halt.

FutureForgeOnline Hobbit House 1

 

Two blocks of polystyrene topped and tailed with foam board 

make the body of this Hobbit House.

I know we are all used to these characters burrowing

but Tolkien does say that Michel Delving has some houses.

He suggests they are brick built

but some are of stone construction, as you see evolving here.

The stone plasti card was donated by Bob, across the village,

along with many other goodies.

Many thanks Bob!

Rescaled windows provided by Future Forge Online.

The planking is coffee stirrers inscribed,

painted with Dark Angels Green,

then dry brushed with Camo Green.

The beams were a piece of luck.

I'm nearly out of rocket sticks

but the kids turned up with Toffee Apples!

More windows awaiting varnish

(glazing)

The front door in situ.

Again FutureForgeOnline.

The central beam is a Magnum stick, inscribed etc.

Painted with Rhinox Hide, dry brushed with Balor Brown,

as were the main roof beams.

The corner verticals are of timber corner moulding.

Door and windows now all fixed.

Styrene 'roof' being shaped up.

Roof support beams (RHS) are awaiting paint.

Here those beams are painted and fixed.

Styrene cut down to size using hot wire cutter.

A layer of filler/glue mix now applied.

Started to apply Brown Earth

but realised that chimneys were not fixed.

Now they are but awaiting pots.

The left one is rocket stick, the right one is FFO.

Computer has had problems for past fortnight or so,

hence delay in posts.