Faramir and Damrod

I've brought the bases in line with the earlier Rangers though the first ones had glue and sand as 'earth'.

The later set had 'Brown Earth' painted on and highlighted with Balor Brown and white, as these do.

That's Warboss or Goblin Green around the base (no idea what it's now called.



Nice models, however, the size of those swords is ridiculous.

Shame they not well painted.

That matt varnish experiment was a disaster.


However, wot I want to know is, why did Tolkien name Faramir's mate after variation 9 of Elgar's Enigma Variations?

Faramir and Damrod

A comparison between this unfinished pair




Unvarnished

Varnished in gloss

and then varnished in matt.


I'll note that a new pot of matt might be needed, also a soft brush perhaps and not to over brush.

The ignorance of these points has, unfortunately, given them a 'scratched' look.

One Week Only Orcs 5

 Close ups

One Week Only Orcs 4

Here's the last of the one week Orcs, the four bowmen.

It will be the last of me too, for a while, as I prep 10 metal Khandish Warriors

These chaps were the most difficult of this tranche of Orcs, mostly because they have lots of little crooks and nannies to get paint into.

Enjoyable to paint though and neat models though there were occasionally odd bits of metal that I couldn't work out. I simply hacked most of them out. They also seem to be not quite finished, in places.

I was unsure of the colour of the fletchings but took my own way in the end. The only illustrations I could find seemed to indicate grey - plain uncoloured goose feathers. I think there's something early in The Hobbit (film) that shows them but I thought I'd go for 'poisonous' colours, sickly green and yellow, and blood red. Seemed more in keeping. Sorry Peter.

One week only Orcs 3

The last batch of 'one week only' Orc warriors with only the four bowmen to come.

These chaps seem to have been put together by components and I don't think I've noticed that previously.

Note the worn patches in the left hand pairs of trews in the first two shots

It seems to me that The Dark Lord now has an assembly line working for him rather than having to conjure up these Orcs all by himself.

No wonder so many turned up outside the gates of Minas Tirith.

I was still a little concerned about the brightness of the colours but they seem OK.




This chap on his own simply wanted to show off his rather posh shield.

One Week Orcs 2

The second little batch of these 'One Week Only' Orcs are ready.

At least I thought they were.

However, I think there are a couple of little touches required

This first pair seem OK but having trousers to match your skin colour may be a fashion thing in Mordor but I think I'll have to change it.

The piece of fallen volcanic lava from Mount Doom is a chip of the old (breeze) block.

This is the first evidence of those '...razor sharp rocks' having any effect on these Mordor Orcs.

Though I suppose it could the Mordor version of the Haka.

I also note that there's a chap whose hair has not been highlighted in this second pair.

In fact, both of them!

I've tried a broader range of colours but I do wonder if some of them are a little too bright?

Something which could never be said about Orcs in general.

One week Orcs

I've worked on the first five of these rather special orcs with the other 14 queuing up behind.

I think that they are excellent one piece models - no need for super glue except for use on the bases.

I've kept to the usual dull colours, made even more dull once washed in Nuln Oil or in Agrax Earthshade as here.

I do notice though that , in these five, brown is the colour they've picked out of the wardrobe.

Skin colour also seems to have a theme and perhaps in both clothes and skin I might go for a little more grey in the next group.

I seem to have missed the highlighting on the hair of one of these guys.

I've tried to keep their bases in line with tyhe previous (plastic) Mordor Orcs using 'Slate Beach' washed in Nuln Oil and then highlighted with Forrest Grey.

Weaponry, poses and faces of these guys are excellent and the result is every bit as good as anything in that awful resin.

I do need to sprinkle a bit of rust about though.

Scouring of the Shire 2

 There's always one isn't there!

I think this is Merry, delayed because of that weak sword arm.

I finally managed to fix it with super glue and then used the same glue to fill gaps around it.

Then there was the job of patching up six different colours of paint and varnishing.

Even now I've noticed that patch of unwanted brown earth  on the base.

Kahandish Chariot

While waiting for the Scouring bases to dry and the Greenstuff on the Orcs to do its green stuff, I had a look at this Khandish Chariot.

Not for long.

Look at all those super glue joints!

Orcs (this week only!)

 14 Orc warriors and 4 Orc bowmen were available for a short time only (1 week?)* and here they all are, Greenstuffed into their bases.

While nothing compares with the problems with GW's 'resin' models, metal has its problems.

The main one is the need for a varnish finish after painting as the paint chips easily on this hard material.

A minor one is the difficulty setting them in their bases.

The tab beneath them that supposedly fits their slot in the base, rarely does being too narrow.

As with these chaps, you have to bend the tab till it gives some purchase, then glue them.

Once the glue is set, I fill up gaps with Greensdtuff which helps with the adhesion.

This is an unusual and very dynamic pose.

I've cut away the useless spike of 'grass' that his other foot was attached to which leaves a particularly large gap to be filled with Greenstuff.

They look excellent models and I look forward to them producing more 'one offs' like this.


(* Of course I fully expect a further issue at some point 'due to popular demand')

Scouring of the Shire

The Scouring of the Shire models were easy to paint though not so easy to keep in one piece.

Two of the Hobbits have arms that are fixed with super glue but one of them sneezed and his sword arm fell off.

He'll be along later.

I should have given them all a dusting down as I see they are sprinkled with a fair amount of grass, here and there.

The pairing of 'Sharky' and Wormtongue doesn't quite work for me.

'Sharky' belittles Wormtongue one more time as he leaves Hobbiton and is then stabbed.

I see him walking away, not pointing.

Why would he point?

He expects Wormtongue to follow him.

Nice models though.

Gondor Trebuchet 3

Not much has changed since yesterday but here is the finished article with the engineer's bases given another coat and a sprinkling of bent copper wire tools added.

I figured they might need a crowbar or two to shift those rocks.

The scouring of the Shire set is painted and varnished (being metal) but not based yet.

After that should be those 'once in a lifetime' orcs that they produced six weeks ago.

Or the Mordor Siege Bow if I can locate all the parts.

I wouldn't put it past Smeagol to have traded them in for fish at the scrap metal dealer's.

Gondor Trebuchet 2

Finally the Gondor Trebuchet is nearly finished.

The engineer's bases need another couple of coats and they could do with a couple of crowbars to get those large rocks into the sling.

There were many problems along the way, mostly to do with the material it's made of.

I hate resin!

I've already moaned about the breakages to the 'rope', now replaced by a piece of string, and the width of the construction requiring a self made  winding shaft.

However, had the engineers been plastic they would have been easy to glue to their bases.

The plastic glue would have melted them firmly into position.

Using so called 'superglue' led to them leaving their bases behind.

I had to scrape a hole in the paint and then pour in extra glue (hidden behind rocks) beneath their feet.

The trebuchet should stay in place as it has much more in contact with the base.

The base for the trebuchet and for the engineers is Slater's Plastikard painted with Administratum Grey and                                                                                                      washed in Nuln Oil.